Dehumidifying Dryer |
|
|
 |
Dehumidifying Dryer |
Name:Dehumidifying Dryer Alias: Dehumidifying Dryer,Plastic dehumidifying dryer, Desiccant dryer,Resin Dryers, Plastic Dryer, Resin dehumidifying, Dehumidifier, Resin Dehumidifier, Plastic drying equipment. |
Dehumidifying Dryer use:Plastic Dryer Also known as:Plastic Dehumidifying Dryer,Plastic Dryer,Plastic dehumidification dryer, Plastic Dehumidifier,Resin Dryers, Resin dehumidifying, Resin Dehumidifier,Plastic drying equipment, Mainly used for highly waterproof special plastics and resins, these resins and plastics require ultra-low dew point -40℃ dryer. Such as PA, PET, PC, PBT, etc., optical grade GCD-OP model can be used to produce optical grade products, such as lenses, LCD light guide plates, optical discs, etc. Under ideal conditions, the lowest dew point can reach -40°C. Composition: The dehumidification dryer integrates the three functions of dehumidification, drying and two-stage feeding, which is especially suitable for engineering plastic materials with strong moisture absorption. |
Dehumidifying Dryer equipment |
Dehumidifying Dryer application |
Application of plastic resin parameters of plastic dryer |
|
Plastic |
Dryer |
Density |
Drying time（h) |
Drying temperature |
Atmospheric flow(m3/kg） |
Moulding moisture content(%) |
Initial moisture contnt(%） |
| ABS | √ | 0.55 | 2-3 | 85 | 2 | <0.020 | <0.2 |
| CAB | √ | 0.60 | 2-3 | 70 | 2 | <0.020 | <0.6 |
| EVA(2) | √ | 0.60 | 2-3 | 90-105 | 1.8 | - | - |
| EVOH | √ | 0.60 | 2-3 | 90-105 | 2 | - | - |
| LM(4) | √ | 0.50 | 3 | 600 | 2 | <0.080 | <0.2 |
| LCP | √ | 0.80 | 3-4 | 150 | 2.2 | <0.01 | <0.05 |
| PA11 | √ | 0.60 | 3-5 | 70-80 | 2 | - | 0.6-1.2* |
| PA6.46.6 | √ | 0.60 | 4-6 | 70-80 | 2 | 0.15-0.02* | 0.6-1.2* |
| PAI | √ | 0.85 | 6-8 | 180 | 2 | <0.02 | - |
| PAR | √ | 0.70 | 5-6 | 120 | 2 | <0.02 | - |
| PBT | √ | 0.80 | 3-4 | 130-140 | 2.2 | <0.02 | <0.15 |
| PC | √ | 0.65 | 2-3 | 120 | 2 | <0.02 | <0.3 |
| PC/ABS | √ | 0.65 | 42798 | 100 | 2 | <0.020 | <0.1 |
| PC/PBT | √ | 0.75 | 3-4 | 110 | 2.2 | - | - |
| PE.HDEPE. LDPE black3% |
√ | 0.50 | 1 | 85 | 1.6 | <0.01 | <0.02 |
| PE.HDEPE. LDPE black40% |
√ | 0.70 | 2-3 | 80-90 | 2 | <0.02 | <0.2 |
| PEEK | √ | 0.80 | 3-4 | 150-160 | 2.2 | <0.05 | <00.1 |
| PE(1)(3) | √ | 0.75 | 4-5 | 140-160 | 2.5 | <0.01 | <0.2 |
| PEN(1)(3) | √ | 0.86 | 5-6 | 150-170 | 3 | <0.005 | - |
| PES | √ | 0.80 | 3-4 | 150-180 | 2 | <0.05 | 0.35 |
| PET | √ | 0.84 | 5-6 | 160-180 | 3 | <0.003 | <0.2 |
| PETG | √ | 0.74 | 4-5 | 65 | 3.5 | <0.01 | <0.1 |
| PI | √ | 0.70 | 2-3 | 120 | 2.2 | <0.02 | - |
| PMMA- | √ | 0.65 | 3-4 | 80 | 3 | <0.02 | <0.3 |
| POM | √ | 0.85 | 2-3 | 90-100 | 2 | - | <0.15 |
| PP | √ | 0.50 | 1 | 80-90 | 2 | - | - |
| PPO | √ | 0.55 | 2 | 100-110 | 2 | <0.01 | - |
| PPS | √ | 0.80 | 2-3 | 130-140 | 2 | <0.01 | <0.03 |
| PS [GPPS.EPS.HIPS] |
√ | 0.55 | 1 | 80 | 1.7 | <0.02 | <0.05 |
| PSU | √ | 0.80 | 3-4 | 120-130 | 2 | <0.05 | <0.1 |
| PIT | √ | 0.80 | 5-6 | 130-150 | 3 | <0.05 | <0.2 |
| PUR | √ | 0.75 | 2-3 | 70-90 | 2 | <0.02 | - |
| PVC | √ | 0.85 | 1 | 70-80 | 1.4 | <0.02 | - |
| SAN | √ | 0.55 | 2-3 | 80 | 2 | <0.02 | <0.1 |
| SB | √ | 0.60 | 1-2 | 80 | 2 | <0.02 | - |
| TPE | √ | 0.65 | 2-3 | 110 | 2.2 | <0.05 | <0.3 |
| TPE | √ | 0.65 | 2-3 | 80 | 2.2 | <0.1 | - |
| TPO | √ | 0.55 | 3 | 70-90 | 2 | - | - |
| TPU | √ | 0.75 | 2-3 | 70-100 | 2 | <0.02 | - |
Working principle of plastic Dehumidifying dryer |
